FREE RETURNS. STANDARD SHIPPING ORDERS $99+
Showing 1–16 of 21 results
Jura Thermoblock Anodizer (also called Heat Exchanger) is used in the following Jura Impressa models: J5, J9, J80, J90, XJ9 Z5, Z7, Z9, GIGA 5, GIGA W3 and GIGA X7 Thermoblock Anodizer (Heat exchanger) is located beside the Ceramic Valve and below the thermoblock boiler. Typically, Thermoblock Anodizer starts to leak due to scale build up…
Complete Thermoblock with PTFE Tube and Water Inlet and Outlet Fittings. The new thermoblock replaces the old one, as shown in third picture, with compression fittings. PTFE Tube runs from membrane regulator to the thermoblock inlet. Fits JURA Impressa E8, E50, F7 and F9 models.
This temperature sensor is mounted onto the boiler thermoblock in JURA coffee machine. The sensor registers the temperature of the boiler for heating water to brew coffee and steamed milk. When the temperature sensor malfunctions, the machine displays ERROR 2. Please review the picture of the sensor and match it with the sensor in your…
This temperature sensor is mounted onto the boiler thermoblock in JURA coffee machine. The sensor registers the temperature of the boiler for heating water to brew coffee and steamed milk. When the temperature sensor malfunctions, the machine displays ERROR 4. Please review the picture of the sensor and match it with the sensor in your…
Jura thermoblock temperature sensor S7 Avantgarde, S9 Avantgarde, XS90, GIGA 5, GIGA X7 One end with metal loop ring, one with black male connector with 2 pins. The metal loop ring is screwed on to the hot water coffee thermoblock, the other end with 2 pin male connector is connected to female connector for the…
Jura Thermoblock Temperature Sensor | Fix Jura ERROR 1 | ERROR 2 | ERROR 3| ERROR 4 Thermal sensor, with two male pins, for measuring water temperature for coffee steam. See below for error details specific to Jura machine.  End to end length of sensor is 7 inches. Please measure the length of your existing…
Jura Omega Thermal Sensor | Fix ERROR 3 | ERROR 4 Also called Omega Sensor. Jura part number 10132. Jura ERROR Codes Error 3 – Error 4 Compatible Models S7 – S7 Avantgarde – S9 – S9 Avantgarde – S9 One Touch – S9 Classic – S90 – S95 X7 – X90 – X95 –…
Thermoblock 2011 L 120V, 1200W for Steam function. Fits JURA X8, Z8, GIGA 6, GIGA W3 and GIGA 10 Models. Please check voltage and wattage printed on the side of the thermoblock before ordering.
Thermoblock 120V, 1200W. Fits Jura Impressa Z5, Z7, and Z9 models. This thermoblock is used for heating hot water and coffee. Z models have two thermoblock s; this is the bigger of the two, located on the left front side of the machine. Clamped reinforced silicone hoses are included, as shown in the picture.
Thermoblock 120V, 1400W. Includes 5 O-Rings; 2 black and 3 red blue O-Rings for PTFE tube connection. The O-Rings get hardened due to calcium sediments in water. It is recommended that O-Rings are replaced with the thermoblock. Please note that this is a brand new thermoblock. All electrical parts sales are final. Installation instructions are…
Thermoblock 120V, 1400W with Reinforced Silicone Hoses. Temperature sensor and thermal fuses are NOT included. This thermoblock often develops a crack and causes leakage. Please check model number before ordering. Fits JURA J6 TFT, J90 and Impressa XJ9 models.
Thermoblock 120V, 1200W with Hoses. Fits JURA Z5, Z7 and Z9 models that are sold in USA and Canada. This is the smaller of the two thermoblock s in Z models. Sales of all electrical parts are final. Technical support is not provided. This is the frequently replaced part in JURA Z5, Z7, and Z9…
Thermoblock 120V, 1400W. Fits the following JURA models listed below. Jura part number 10759. This is a brand new thermoblock. O-rings are sold separately. Please compare pictures with the existing thermoblock before ordering. This part is non-returnable. Installation instructions are not provided. A1 – A9 F7 – F8 TFT Z6 – Z8 ENA Micro 1…
Jura Thermoblock 2010L 120V-1400W ENA Micro, Impressa A9, F7, F8 TFT Jura thermoblock 2010 L, 120V 1400W. PTFE tubes not included. Machine is not heating up? Coffee not hot enough? ERROR 4 displayed on the screen? Check thermal sensor and thermal fused cord mounted on the boiler. If both check out, then replace the thermoblock….
Jura ENA Micro Thermal Sensor to fix ERROR 1 and ERROR 2 Thermoblock temperature sensor. Thermal sensor is mounted onto the boiler. Â It senses the hot water temperature inside the boiler for hot water and steam. Compatible Models Impressa A9 ENA Micro 1 – ENA Micro 5 – ENA Micro 9 Fix ERROR 1 and…
Thermoblock temperature sensor Length =200mm. Loop ring is is connected to the hot water steam thermoblock via torx screw. This is a smaller of the two thermoblocks features in GIGA models. Fits JURA Impressa Z5, Z7, Z9, X9, GIGA 5, GIGA W3 and GIGA X7.
End of content
End of content
No products in the cart.
